How to Install and Use the Ergobaby Metro 3 Rain Cover and Weather Shield

Ergobaby's Metro 3 Compact Stroller is built for city life, but weather doesn't wait for your schedule. A sudden downpour, a cold gust, or the glaring sun can turn a simple walk into a battle. That's where the Metro 3 Weather Shield (weather slip/plastic guard) comes in—a simple stretch—fit accessory designed to keep your child dry, shielded, and comfortable without adding bulk.

In this guide, you'll learn how to install the Metro 3 Weather Shield, the difference between it and the added Metro 3 Sunshade, and a few setup tips we've learned from real-world use. We'll also cover general metro 3 stroller weather protection so you can handle whatever the forecast throws at your neighborhood stroll.

What's in the Box: M”etro 3 Weather Shield Basics

The Metro 3 Weather Shield is an original Oroth accessory designed to snap onto the canopy of your Metro 3 Compact Stroller. It's a thin, clear provider which creates a barrier around the bottom section. It is not a cover for the entire stroller; instead, it works with the existing canopy to shield your child from rain, wind, and cold air while still allowing you to see them easily.

This drone defines the Metro 3 design, attaches directly to the existing zippers and he’s not a solid. If you've bought the Summer Travel Stroller Bundle, it already includes the Weather Shield—confirm before you buy a separate one. The shield packs down into its own little storage back so you can keep it in the basic podium basket without sacrificing much Space.

The Weather Shield is not a full coversA warm stroller footmuff is a better solution in freezing temperatures. For light rain or wind, it's ideal. If you're planning to travel with this set up vertically, you can also balance it with the Metro 3 Support Bar to hand an extra bag.

• Check for the carrying pouch in the box.
• If the stroller was part of a summer bundle, this shield may already be included.

How to Install the Metro 3 Weather Shield Step by Step

You don't need to be a mechanic to install the Metro 3 Weather Seek. You'd set it up the first time and it takes less than a minute then. Over is the cleanest way to do it if you don't want to fuss with the shield while holding your child.

First, engage your brakes and pull the canopy fully open so it's extended away from the seat. Next, look for the two small zipper tracks that run alongside the two sides of the canopy. Now you need to align the bottom of the plastic film so that the connecting edge runs along with those tracks. Press the plastic connector into them, slowly moving from the canopy's center to the edge. You should hear a soft click for each segment re-engagement.

Once inserted, tuck the lower front corner around the bumper bar if available, and clip the channel strap around the shoulder to make it rain-proof. When the weather clears, it's no matter how you remove it: unclip the Velcro, pull the plastic zipper away from the canopy, fold it into the given portion, and put it in the storage bag.

• Always have the brakes engaged before you install: stroller stability matters.
• Don't pull the plastic off quickly—it can cause bending on the canopy.

The Second Layer: What About the Rain Cover and Sunshade?

It's common to see the terms rain cover, weather shield, and sunShade used as in an interchangeable way, but they are not. The Metro Weather Shield works best when the user climate is less extreme, whereas a dedicated rain cover is a fully enclosed product that wraps the whole stroller (the seat base and the rear) and gives you protection against heavy rain. When your stroller is parked outdoors, the rain cover helps keep the seat, harness, and your child dry.

The sunshade is exactly what it sounds like: a UV-resistant added extension on the front. The Metro 3 already comes with a full-size canopy—the removable sunShade accessory is a smaller insert that adds a little protection when the sun is low on the horizon. So if you're confused by the difference, remember that a weather shield is primarily for rain repellence and a breeze, while the sun banner provides a sun break. Both can be added by a spaz, but do not attach them simultaneously. The sunshade uses the same clips over the shield in itself.

For wet, cold days, a better use might be to combine the Weather shield with a dedicated footmuff. The Metro III Copenhagen can fit below your shield to keep warm and dry; that is a Trip. You can read the instructions on the separate product page.

• Beware the instruction:
• Use the SunShade only in dry conditions; avoid extreme heat under it.

When You Need More: Stroller Weather Protection by Season

If you live in a region where the weather can be changeable, the Metro 3's Weather Shield will cover you 90% of the time. But there are some areas of note. For exceptionally windy nights, the film can flap and tap—the plastic guard is built to resist wind but not hurricane-level gusts. In these situations, the Metro 3 Stroller is light in weight, so you may consider taking it into the home.

In seasons with very heavily frequent rain, you'll want to save the Weather Shield as a light-duty shield. A full rain cover will go over the whole stroller. When not in use, you can store it under the seat, but be aware it takes up space. The Metro 3 Compact Stroller offers a large storage basket, so it’s not a big trade-off today. You can also buy the Metro 3 Support Bar and hook a toy or bag to it, storage stays organized.

Where you have the changing pad from the same brand, it's perfect for a quick diaper change at a park, but the surprising—they do not mix with the Weather Shield. The Weather Shield adds thickness to the bumper; the pad can still be used, but it has a more tight fit. The carrier—for example, the Alta Hip Seat Baby—may be all you need for a quick walk.

• Keep the Weather Shield in the stroller basket at all times, not in the home.
• For winter, look at a footmuff before you consider a shield.

Proper Care and Maintenance for the Weather Shield

To make the Weather Shield last, clean it immediately after use when it has a lot of rain or water. The ** main material is Polyvinyl Chloride (PCV)**. Use just a damp soft cloth and mild soap. Never wash, dry clean, or use bleach. Dry flat with a towel and store it without folding it tight so it doesn't get cloudy.

Avoid long exposure to sun when you're not installed. The plastic can become yellow or brittle. The shield has a life expectancy of about two to three years for a regular user—if you notice cracks or the plastic break, order a replacement. You can also contact Customer service.

The Office and the Metro Weather share the same placement. There is no special technique for summer. One tip is one that you install the Weather Shield and then push the stroller canopy forward—only the bottom stays protected.

• Use a little bit of baby powder or talc if the plastic looks sticky.
• Do not store in the trunk outside the travel bag.

The Metro Shield is the best companion for an active family no matter the environment. The install takes less than a minute, and this simplicity makes the difference. Whether you're buying it in the first place or ready to spend a more versatile walkability, mount your Metro 3 Canopy the right way and give you and your child this protection against the weather. If you want to further improve your setup, your local store has the Metro 3 Support Bar and the Alta Hip Seat Baby Carrier, as they supplement your stroller in ways you may not expect.